New Holland Products:
Harvesting Equipment
Learn More
CR9000 Twin Rotor®
Combines-NEW!
The NEW CR9000 Twin Rotor® combines are the
result of over 30 years of rotor technology and field experience.
Year after year, the impressive grain quality and harvesting
capacity of New Holland combines confirms the effectiveness of the
Twin Rotor design.
Model CR9040 Combine
Model CR9060 Combine
Model CR9070 Combine
CX8000 Super Conventional Combines New!
The NEW CX8000 Super Conventional combines are the super
choice for fast harvesting! Backed by 100 years of factory
production knowledge and more than 40 years of conventional combine
experience, CX8000 combines deliver super-fast threshing and
separation, less grain damage and a new level of convenience and
comfort.
CX8070 Combine
CX8080 Combine
CX8090 Combine
Chopping Corn Header for CR and CX Combines
New!
The 99C chopping corn header features two chopping knives for each
row unit for optimum chopping and distribution of crop residue—ideal
for no-till farming. Automatic controls maximize your control and
minimize fatigue.
99C 6-row Chopping Corn Header
99C 8-row Chopping Corn Header
99C 8-row folding Corn Header
Floating Cutterbar Draper Header New!
The 88C floating cutterbar draper headers are the
ideal match for high-capacity New Holland combines harvesting
on-ground crops. Available in widths from 30 to 45 feet, the 88C
hugs ground contours to get every bit of crop and provides
consistent, head-first material flow from field to feeder house.
Corn Header for CR
and CX Combines
98C Corn Header
The 98C corn header is smooth, fast and durable. It gets under
downed corn, picks it up better than the competition and takes in
less trash for more combine capacity. Available for 6 row, 8 row and
12 row applications.
Cutterbar Headers for CR and CX Combines
72C Rigid Cutterbar Header
The 72C rigid cutterbar header is available in 20-, 25- and 30-foot
widths. The smallest model is equipped with a single-knife drive,
while the two larger models feature twin-knife drives.
74C Flexible Cutterbar Header
The 74C flexible cutterbar header is available in three cutting
widths, and each is equipped with a twin-knife drive. The 74C gives
you a choice of 1 1/2-inch knives and guards (twin cut) or 3-inch
knives and guards. It also provides up to 4 1/2 inches of float and
closely follows the ground contour to pick up low-growing crops.
And, with the 74C, the New Holland Terrain Tracer™ header flotation
system is standard equipment.
Draper Headers for CR and CX
Combines
92C Rice Belt Header
The 92C rice belt header is 25 feet wide and features your choice of
single or double knife drive. The 92C is a two-deck, center-mounted
header that features a single-feed belt, a large-diameter
full-floating auger, and extra-long retractable fingers.
94C Grain Belt Header
The 94C grain belt header is available in 25-, 30-, 36-, 39- and
42-foot widths. Deck shift options on the 30-, 36-, 39- and 42-foot
models let you quickly convert from combining to swathing. A
self-contained hydraulic system supplies smooth, reliable power to
both the draper belts and the knife drive without the use of
V-belts, pulleys and chains.
Flex Draper
Header for CR and CX Combines
84C Flex Draper Header
The 84C flex draper headers is available in 30- and 36-foot widths
and is ideal for in-ground harvesting. Draper design provides
smooth, even "head first" feeding in the toughest conditions and
increases combine capacity up to 20%. A suspended floating head with
flexing wing sections provides 7.5 inches of free vertical and 4.8
degrees of free lateral flotation. The 84C can easily be locked for
rigid off-ground direct cutting.
Windrow
Pick-up Header for CR and CX Combines
76C Windrow Pick-up Header
The 76C windrow pick-up header is available in 12, 14 and 16-foot
widths and two designs: SwathMaster™ Belt Pick-up and Rake-Up™
Pick-up.
SwathMaster™ Belt Pick-up
SwathMaster™ Belt Pick-up uses four individual rollers, a pickup
belt that gently lifts crop into the header and a draper belt that
carries the crop to the auger and into the feeding area. Choose a
model with both front and rear windguard and hydraulic adjustment on
the front windguard, or choose a model with a rear windguard with
mechanical adjustment.
FX™ Self-Propelled Forage Harvesters
Peak quality silage at peak speed
As a custom harvester or large dairy
operator, you’ll appreciate how New Holland FX harvesters let you
work faster—in all crop conditions—with added convenience.
FX40 Forage Harvester
FX50 Forage Harvester
FX60 Forage Harvester
Pull-Type Forage Harvesters
When it comes to rugged, high-capacity
forage harvesters, no one builds them like New Holland. That's why
New Holland continues to offer America's best-selling forage line.
790 Forage Harvester
FP230 Forage Harvester
FP240 Forage Harvester
Forage Blowers
The high-capacity F62B forage
blower is engineered to quickly center-fill tall silos and make
it easy to keep pace with harvesters and wagons.
Crop-Chopper®
Chops a variety of crops
Dampness and morning dew won't slow down chopping when you own a
multi-purpose New Holland 38 Crop-Chopper®.
New Holland Products: (Dealer
Site)
Farm
Tractors,
Compact
Tractors,
Implements for Tractors,
Loaders
for Tractors,
Combines-Forage
Harvesters,
Riding
Mowers Lawn Tractors,
Hay
Equipment,
Crop
Production
CASE IH Products: (Dealer
Site)
Farm
Tractors,
Compact
Tractors,
Combines,
Hay & Forage,
Skid Steers,
Planting & Seeding,
Precision Farming
