Degelman STRAWMASTER PRO

Degelman STRAWMASTER PRO for sale at Kunau Implement, Iowa

Double tap to zoom

Degelman STRAWMASTER PRO for sale at Kunau Implement, Iowa

 

Features

Harrowing Becomes Light Tillage

The Degelman Strawmaster Pro is a revolutionary machine designed for both straw management or light tillage applications. With 30 inch long tines placed in 4 rows, this machine is beyond any other harrow bar. The Strawmaster Pro will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals or act as light tillage.

Contouring Frame

Under float or under pressure, the harrow sections are designed for flexibility. The spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The spring bars can then flex In response to counter pressure from the land contours with each section rising over hills and falling into hollows.

Unique Adjustment for Harrow Sections

The Strawmaster Pro is equipped with an adjusting rod and arm located on a rubber dampening system. This will allow for harrow frame sections adjustment to ensure that they are running parallel to the ground.

Patented Torsion Technology

Simply rotate the 8” x 8” beam hydraulically and apply more pressure through the spring bars.  Strawmaster works the way you want it to.

Alliance Tires

The Alliance 328 HS (High Speed Flotation I-328) is designed with good selfcleaning
characteristics, which is suitable for on and off-the-road agricultural service
on trailers and implements. The high load capacity and low inflation pressure
of the tire results in high degree of agricultural soil protection, as well as low
rolling resistance on both, on and off-road uses. It’s strong nylon construction and
compounds ensure long life.

Solid Truss Autofold

The solid truss on the Strawmaster Pro allows for sharp turning while maintaining a rigid connection between the hitch and wing sections - no breaking cables. This system allows you to back up and maneuver out of tight situations.

Specifications

SPECIFICATIONS    
Model SMP80 SMP100 SMP120
Widths Available 80' 100' 120'
Weight 37,300 lbs 45,900 lbs 48,300 lbs
Horsepower (min) 400 hp 450 hp 560 hp
Horsepower (ideal) 440 hp 550 hp 620+ hp
Transport Hitch Weight 3,455 lbs 3,780 3,750
Transport Length 64'-8" 74'-8" 84'-2"
Harrow Sections 8 10 12

 

ALL MODELS  
Transport Width 18'
Transport Height 12'
Trailer Frame 6" x 10" x 3/8"
Wing Beam 12" x 16" x 3/8"
Section Beam 8" x 8" x 3/8"
Rows of Tines 4
Tine Spacing 24" Centers
Tine Section Frame 2" x 4" x 1/4"
Tine Size 5/8" x 30" Carbide Endura-Tip
Tine Replacement Easy Drop-Out Tine Bar
Hydraulic Outlets 4
Hydraulics - Transport 2-1/2" x 16" x 1-1/2" Rod
Hydraulics - Beam Lift 4" x 24" x 2" Rod
Hydraulics - Auto-Fold Latch 2" x 4" x 1-1/4" Rod
Tine Angle Adjustment Ratchet Jack
Adjustable Down Force Hydraulic
Hitch Lift Hydraulic
Tires 328 High Speed Flotation 550/45 - 22.5