Model |
4830-836F |
Transport Width (ft/m) |
14'5" / 4.4 |
Frame Type |
6" x 6" Double Rank Toolbar |
Number of Shanks |
8 |
Shank Spacing (in/cm) |
36" / 91 |
Working Width (ft/m) |
24' / 7.3 |
Approximate Weight (lb /kg) |
6,584 / 2 986 |
Approximate Weight (lb/kg) |
4,984 / 2 261 |
STANDARD EQUIPMENT |
|
Hitch Type |
Category III 3-Point with Parking Stand |
Coulter Blades |
22" 1/4" Smooth Coulter Blades, 450 lbs (250 kg) down pressure |
Shank Mount |
Spring Reset: 2500 lb Point Load, 20" Trip Height |
Shanks |
No-Till (Very Low Surface Disturbance), 1/4" Profile Wear Bar Austempered Ductile, Non-Reversible, Chromium Carbide Shank Side Protectors |
Points |
1-3/4" Austempered Ductile Points, 8" Austempered Wings |
Depth Control |
Ratchet Jack Adjustable Gauge Wheels |
Gauge Wheels |
Two 20.5" x 8", Load Range E |
Transport Locks and Safety |
Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit |
OPTIONAL EQUIPMENT |
|
Hitch Type |
Drawbar Pull Hitch with rear lift wheels, Includes Four 11L x 15" 8-ply Tires, Duals, Two 11L x 15" 8 ply front mounted gauge wheels, One 4" x 16" and one 4 1/2" x 16" Cylinder, Royal Plate Plus® Cylinder Rods, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (less parking stands) |
Shank Mount |
Rigid: Shear Bolt Protected, 2,800 lb |
Shank Mount |
Pivoting Pathfind'r Spring Reset, 2500 lb |
Shanks |
MRD (Minimum Residue Disturbance) 1-1/4" Reversible Austempered Ductile Wear Bar , Chromium Carbide Shank Side Protectors |
Points |
2" Chromium Carbide Points |
Points |
3/4" Chromium Carbide Points (MRD Shanks Only) |
Points |
2" Welded Points (MRD Shanks Only) |
|
(Recommended for Rocky areas) |
Shattering Wing |
5" Chromium Carbide Shatter Wings (MRD Shanks Only) |
Shank Cap |
Low Disturbance Shank Cap (in lieu of wing) |
Closing Wheels |
(2) 4 x 16" smooth closing wheels, adjustable spring tension (limit shank soil blowout) |
Wing Gauge Wheels |
Two Extra 20.5" x 8", Load Range E |
Shank Stagger Kit |
6" Offset Between Shanks |
OPERATING INFORMATION |
|
Recommended Operating Speed (mph/km/h) |
4 - 7 / 6 - 12 |
Recommended Working Depth |
8" - 16" / 20 - 41 cm |
Recommended Tractor Power Range (mph/kw/h) |
30 - 40 PTO hp per Shank / 22- 30 kW |