Art's Way LS1600

MAXIMUM BLADE CAPACITY

With 15 in. ground clearance and 30 in. blade height, you can do a lot of work in a short period of time. Reinforced on the back of the blade with industrial steel cross beams, the blade is built structurally strong. Angled reinforcement beam at the cutting edge keeps the cutting edge straight. Made of heat treated, high carbon steel gives the cutting blade longer life before replacing.

SMOOTH PERFORMANCE

High curved blade reduces drag and maximizes dirt transfer. Use with or without the scraper ends for maximum control of flow. Blade tilts up to 15 degrees for slope cuts and with 43 degrees of angle, the blade swings wide increasing working range.

REAR STEER OPTION

Using hydraulic cylinders operated from your tractor, you can position the blade up to 5 feet to the right or the left. This makes it easy for you to maneuver around tight areas along fence lines, buildings, trees and other obstacles you might encounter. Steer clear of the slippery surfaces of drainage ditches, irrigation ponds and other waterways by offsetting your grader and keeping your tractor on safe dry ground.

• 16 foot blade widht
• Standard or Rear Steering
• Optional Gauge Wheels

Sorry, currently there are no specs but check back with us later.

General Specifications	LS1600
Blade length	16'
Blade Angle	43 degrees
Blade Tilt	15 degrees
Blade Height	30'
Grader Overall Length	17' 5"
Clearance to Ground	15"
Transport Width Unpinned	9' 8"
Tires	2 - 11L x 15
Hubs	6 - Bolt
HP Requirements	100 -220
Total Weight	3305 lbs.
Tongue Weight	680 lbs.
Frame Tube Size	8 x 6 x 5/16
Optons	Gauge Wheels