Farm King 2628 Kunau Implement, Iowa

Double tap to zoom

Cutting wheel design provides a smoother cutting action and higher productivity
Durable carbide-tipped cutting teeth are economical and easy to replace
Stabilizer bar provides solid footing during operation
Maneuverable – goes anywhere a tractor or skid steer can; gets into tight places
Easy to operate – hydraulic controls allow easy operation from the seat of the power unit using existing hydraulic controls
Hardened bushings and grease zerks used at major pivot points for increased reliability and extended service life
Standard pressure relief valve for precise control of cutting feed rate
Rubber deflector helps control chips and debris during grinding
Parking stand for easy storage

Model	2628
Hitch	Cat. I
Overall length	75"
Drive system protection	Slip clutch
Gearbox rating / ratio	60 hp / 1:1.5
Cutting wheel construction	Welded 2 piece laminated steel
Cutting wheel thickness	3/4"
Cutting wheel diameter	26"
Cutting wheel speed @540 PTO RPM	810 RPM 5,5151 ft/min
Number of teeth	33
Cutting teeth construction	Carbide steel bolt in
Cut height above ground	18"
Cut depth below ground	10"
Max. cut depth per pass	5"
Max. horizontal cut	28"
Swing arc	45°
Min. power / flow required	22 PTO hp
Max. power / flow	50 PTO hp
Drive system	PTO / Series 5
PTO speed	540 RPM
Weight	660 lbs

Farm King 2628