Great Plains Mounted X-Press: MXP04.0-03 » Kunau Implement, Iowa

Great Plains Mounted X-Press: MXP04.0-03

Great Plains Mounted X-Press: MXP04.0-03

Double tap to zoom

Great Plains Mounted X-Press: MXP04.0-03

 

Features


Two Rows of Discs
Mounted two to a standard, the cultivation discs are 20" in diameter. The disc spacing is 10" on both front and rear gangs. Their rotational speed is far greater than more conventional discs. Chopping and mixing are enhanced and a finer seedbed is achieved. Pro-Active Disc units with a trip height of 5" give improved protection against stone damage and improved contour-following at speed. All discs are fitted with a rotational armored bearing housing for enhanced protection.
STRONG DISC UNITS
Can handle high disc down pressure, ensuring long life. The hub and disc turn as one, eliminating blockage and reducing wear. The 200-hour greasing period on disc hubs results in reduced downtime.
MAXLIFT ROLLER
By combining notched wheels and teeth to drive and lift high volumes of soil, the MaxLift Roller creates a fine finish while still consolidating the ground just below the surface. This roller achieves a good mixing effect at high speeds.
EXCELLENT TRASH CLEARANCE
With a massive amount of clearance between both gangs of discs and the rear roller, the X-Press can deal easily with high volumes of trash.
DISC ANGLE ADJUSTMENT (13, 17, & 21 degrees)
Disc angling combined with an inclined disc axle allows the X-Press to achieve the same work with a disc that has a smaller diameter and far less concavity. It penetrates the soil and mixes residue while creating less compaction than conventional short discs.

Specifications

MODEL INFO MXP040-03
WORKING WIDTH 13'
TRANSPORT WIDTH 13'
TRANSPORT HEIGHT N/A
H.P. REQUIREMENTS* 110 to 170
EST. OPERATING WEIGHT* 5,380 lbs.
WEIGHT PER BLADE 180
NUMBER OF DISCS 30
DISC SPACING 10"
GANG ANGLE 9° to 25° (with fully adjustable option)
NUMBER OF SECTIONS 1