420 West White St. Preston, IA 52069
563.689.3311
Open today until 5pm
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
2114 270th Avenue DeWitt, IA 52742
563.659.2866
Open today until 5pm
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
New Holland DuraDisc™ 210M for sale at Kunau Implement, Iowa

Double tap to zoom

New Holland DuraDisc™ 210M for sale at Kunau Implement, Iowa

 

Features

DURABILITY IS STANDARD
DuraDisc™ heavy-duty disc mowers from New Holland combine fast cutting with trouble-free operation and easy servicing to assure you of the dependable performance you need season after season.

MOWMAX™ DISC CUTTERBAR 3-YEAR FACTORY WARRANTY
New Holland’s MowMax™ disc cutterbar breezes through tough mowing conditions and is backed by three full years of factory warranty so you can cut close with confidence.

QUICKMAX™ KNIFE CHANGE SYSTEM KEEPS YOU SHARP
The QuickMax™ knife change system makes it quick and easy to keep knives sharp for the best cut quality.

CONVENIENTLY MOVE FROM ONE TASK TO THE NEXT
Quick-hitch compatibility on mounted models makes hooking and unhooking the mower from the tractor simple so you can move from mowing to tedding or raking seamlessly.

 

PULL-TYPE DURADISC 210M

INCREASED PRODUCTIVITY WITH BUILT-IN CONFIDENCE.
The New Holland heavy-duty DuraDisc™ 210M pull-type disc mower combines the benefits of a wide 10-foot, four-inch cut with easy hookup and a low horsepower requirement.

THE NEXT LEVEL OF DISC MOWER PRODUCTIVITY
You’ll appreciate the smooth operation and maneuverability of the DuraDisc 210M. The 540-rpm PTO driveline features an 80-degree constant velocity joint for smooth, quiet operation and tight turning. A secondary CV driveline option allows you to “steer” around field obstacles on the fly.

CLEAN CUTTING WITH IN-FIELD FLOTATION
You get close, even cutting in uneven terrain with the DuraDisc 210M. The header is suspended from the main frame of the machine with large flotation springs that allow the header to float both vertically and laterally to cut close, but prevent damage and bulldozing in challenging conditions. You can adjust the flotation spring tension easily by turning the anchor bolts.

WIDE CUTTING AND WIDE SWATHS FOR FAST DRYING
Wheels are located inboard of the cutting edge to eliminate run-down of uncut crop. Crop deflectors direct the cut crop inside the tire path and into a wide 95-inch swath.

PROPER CUT QUALITY THE FAST, SIMPLE WAY WITH QUICKMAX™
Maintain a smooth, uniform cut quality by keeping knives sharp with the QuickMax™ knife change system. The special knife tool stored onboard the DuraDisc 210M lets you change bent or dull knives fast and get back to mowing. The QuickMax quick change knife tool and removable toolbox are attached to the right-hand side of the tongue for your convenience.

SAVE TIME WITH SIMPLE ATTACHMENT AND NARROW TRANSPORT
Tractor hookup is easy. Simply drop in the pin, hook up the PTO and three hydraulic hoses. Hydraulic tongue swing allows you to power the machine from transport to operating position and back. The right-hand end shield flips up for a narrow 10-foot, 10-inch transport width. A removable parking jack stand and convenient onboard storage location are provided. The left-hand shield can swing open for additional cutterbar access.

 

Specs

DuraDisc™ 210M  
Cutterbar  
Cutting width ft. in. (m) 10'4" (3.2)
Cutting height in. (mm) 0.95-3.2 (24-81)
Cutterbar tilt angle degrees -2 to -10
Cutterbar operating range degrees +18 to -28
Breakaway angle degrees -
Cutterbar flotation Vertical and lateral, adjustable springs
Type cutterbar MowMax™ cutterbar, modular, with individual sealed reservoirs
Number of discs 8
Knives per disc 2
Disc cutting diameter in. (mm) 19.7 (500)
Disc drive Bevel gears in sealed modules
Disc speed RPM 3000
Cutterbar gear protection Std. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines
Swath width, approx standard* in. (mm) 95 (2413)
Swath width with optional swathboards* in. (mm) -
Driveline  
Minimum PTO horsepower required hp (kW) 60 (44.7)
Input speed RPM 540
PTO shaft spline/size required 6-spline / 1-3/8"
Driveline protection Slip clutch
Overrunning clutch Standard
Belt tension -
Hydraulics and Hitch  
Hydraulic circuits required Two remotes
Minimum relief pressure required psi (bar) 1500 (103)
Hitch Drawbar clevis hitch
Dimensions and Weight  
Overall width in. (mm) 196 (4978)
Overall length in. (mm) 183 (4648)
Height - transport position** in. (mm) 62 (1575)
Weight, operating lb. (kg) 2610 (1186)
Maximum transport speed 20 mph/ 32.2 kph
Tires/wheels 27 x 9.5 x 15 6 PR