Berlon Attachments Skid Steer » Kunau Implement, Iowa

Skid Steer

Berlon Strong mounting plates are manufactured for buckets and attachments used on skid steers, tractor loaders, compact utility tractors, wheel loaders and telescopic handlers. We sell through Berlon Dealers; locate one nearest you, call 1-800-899-3580 or email us at sales@berlon.com.

Many mounting plates are available, including universal-to-euro and euro-to-universal mounting plates, and plates specific to brand machines such as Case, New Holland, John Deere, JCB, Bobcat, Caterpillar, Gehl, Kubota, Agco, McCormick, Mustang, Quicke, Thomas, Takeuchi, Daewoo and all the others.

 berlon mpuf 1 20  berlon mpuf 1hd 20  berlon mpuf 2 20  berlon mpuf 2hd 20
MPUF-1 MPUF-1HD MPUF-2 MPUF-2HD
This mounting plate automatically comes welded onto most Berlon buckets. It is the most versatile, general-use mounting plate, giving a small or medium-sized skidsteer of nearly any brand the ability to lift up to 3,000 pounds. It is 45 inches wide and 19 inches tall.
Universal machines, Also fits Case 1845, XT
Berlon's heavy duty universal skid steer mounting plate is the MPUF-1HD. The MPUF-1HD is designed for more severe situations when a skidloader needs to deliver more power to break, dig or pry.Weighing 61 pounds, it is equipped with reinforcements on the top bar and latch-pin holes, making this mount more effective in handling heavy digging out, prying concrete and rocks, or pulling up roots and tree stumps.
Universal machines, Also fits Case 1845, XT-HD.
The MPUF-2 attachment mounting plate has a much greater surface area which allows it to be welded on to more narrow objects, such as an auger drive unit or a hydraulic breaker.This 120-pound-mount is the same basic mount as the MPUF-1, but the back side is fitted with an 1/4-inch-thick plate that stretches the length of the 45-inch by 19-inch mounting plate.
Universal machines, Also fits Case 1845, XT - with 1/4” back plate
The MPUF-2HD mounting plate is for attachments that have to deliver extra digging or prying power but are unusually shaped and need mounts with greater surface area. Weighing 142 pounds, this skid steer attachment mounting plate is equipped with heavy duty elements, including reinforcements on the top bar and latch-pin holes, but also includes the 1/4-inch back plate which gives it more surface area to be welded onto a greater variety of attachments.
Universal machines, Also fits Case 1845, XT-HD with 1/4” back plate.

 

 berlon mpuf 3 20  berlon mpuf 4 20 berlon mpuf 5 20 berlon mpuf euro 20
MPUF-3 MPUF-4 MPFU-5 MPUF-EURO
Universal Mounting Plate MPUF-3
The MPUF-3 mounting plate is designed specifically to accommodate Case skid steer models with Quick-Tach mounts.
 
This 62-pound plate has three holes instead of the standard two, so that it can fit
onto Case's 1835, 1838, 1840, 1845 and XT models.
 
This universal mount can also be fitted on the vast majority of other Case and non-Case-manufactured skid loaders.
Universal Mounting Plate MPUF-4
The MPUF-4 skid steer mounting plate is a reinforced version of Berlon's three-holed mount for Case skid steers.This mounting plate fits Case models 1835, 1838, 1840, 1845 and XT.
This mount is fitted with a quarter-inch-thick plate on the back, which gives it more surface area with which to weld it to an attachment.
 
This plate also fits on to most manufacturers' compact tractors.
Universal Mounting Plate MPUF-5
This mounting plate, Berlon's MPUF-5, is specifically designed for universal skid loaders with a 60-degree back angle, but has connection holes designed to fit onto a MPUF-1 mounting plate.The design of the MPUF-5 changes the rollback of a bucket without taking away from a bucket's capacity. However, adding more rollback cuts down on the dump angle.
It weighs 56 pounds.
Universal Mounting Plate MPUF-EURO
Berlon's Universal to Euro adapter converts your universal machine to allow for Euro attachments. Our product number is MPUF-EURO.
 
Universal quick tach to Euro/Global conversion plate.
BERLON MPQT U 20 BERLON MPGA 20 BERLON MPHM 1 20  BERLON MPHM 2 20
MPQT-U MPGA MPHM-1 MPHM-2
Universal Mounting Plate MPQT-U
Universal quick tach conversion plate - Euro/Global to skidloader universal
Mounting Plate Model MPGA
This mounting plate, model MPGA, is for Gehl Advantage compact utility loaders.
 
The plate is 20 1/8 inches across and 8 11/16 from the top bar to the bottom lip. Pin holes are 17 7/8 inches apart, center-to-center.
 
The plate is fully welded.
Mounting Plate Model MPHM-1
This mounting plate, model MPHM-1, is for Hydra-Mac and Gehl skid loaders.
 
The non-universal plate fits Hydra-Mac skid steer loader models 8C, 9C, 9CL, 11C, 1200 and 1300. It fits Gehl models 2500, 2600 and 3000.
 
The mounting plate is fully welded.
 
Measurements include 33 3/8 inches across and and 10 3/4 inches from the top bar to the bottom of the plate. The pin holes are 22 inches apart center to center.
Mounting Plate Model MPHM-2
This non-universal mounting plate, model MPHM-2, is for Hydra-Mac skid steers.
 
The non-universal plate fits Hydra-Mac skid steer loader models 10C, 12C, 14C, 1600 and 170.
 
The plate is fully welded.
 
Measurements include 35 5/8 inches across, 10 3/4 from the top bar to bottom plate, and 22 inches between the pin holes center to center.

 

 

BERLON MPRC 30 20  BERLON MPCP 0 20  BERLON MPCP 1 20  BERLON MPCP 2 20
MPRC-30  MPCP-0 MPCP-1   MPCP-2
Mounting Plate Model MPRC-30
This attachment mounting plate, model MPRC-30, is for ASV skid steer loaders.The non-universal mounting plate fits ASV skid loaders RC-30 and PT-30.
Measurements include:
Top bar to bottom lip is 11 3/4 inches
Interior horizontal width is 42 3/4 inches
Center-to-center is 31 inches
It is fully welded and comes unpainted.

 

Mounting Plate Model MPCP-0 
Case 1816, 1818
 Mounting Plate Model MPCP-1
Case 1845 (Non-Universal) must specify 7/8" or 1" bushings
Mounting Plate Model MPCP-2
Case 1830, 1835, 1840 (Non-Universal)
 berlon mpcp 3 20  berlon mpm 1 20  berlon mpm 2 20  Berlon MPNH 1 2020
MPCP-3 MPM-1 MPM-2 MPNH-1
Mounting Plate model MPCP-3
Case 1845 (Non-Universal) 
Mounting Plate Model MPM-1.
This mounting plate, model MPM-1, is for early model, small frame, single pin Mustang, John Deere and OMC Skid Steer loaders.
Small frame single pin Mustang, John Deere, OMC (Non-Universal)
Mounting Plate Model MPM-2
This mounting plate, model MPM-2, is for early model, large fram, single pin Mustang, John Deere, OMC loaders.
It is fully welded and comes unpainted.
Large frame single pin Mustang, John Deere, OMC (Non-Universal
Mounting Plate Model MPNH-1
This mounting plate, model MPNH-1, is for early model, small frame New Holland and John Deere skid steers.
For New Holland machines, this mounting plate will fit mounts that have a sharp angle on the top rather than a curved top.
The MPNH-1 is 32 inches from side to side.
It is fully welded and comes unpainted. Small frame New Holland, John Deere (Non-Universal)
berlon mpnh 2 2020  berlon mpls 1 20  berlon mpgl 1 20  berlon mpgl 2 20
MPNH-2 MPLS-1 MPGL-1 MPGL-2
Mounting Plate Model MPNH-2
This mounting plate, model MPNH-2, is for early model,
large frame New Holland and John Deere skid steer loaders.
This non-universal mounting plate is 43 inches across.
It is fully welded and comes unpainted.
 Mounting Plate Model MPLS-1
This mounting plate, model MPLS-1, is for New Holland skid loaders.
This non-universal mounting plate fits New Holland skid steer loader
models LS120, LS125, LS225, L250 and L255.
From the top bar to the center of the pin hole is 10 3/8 inches. The horizontal interior distance is 21 5/8 inches.
The mounting plate is fully welded.
Mounting Plate Model MPGL-1
These mounting parts, MPGL-1, are for Gehl skid steers.
The non-universal mounts fit Gehl skid steer loader models SL3010, 3310, 3410, 3510
3515, 3610, 3615
The parts are fully welded.
 Mounting Plate Model MPGL-2
This mounting plate, model MPGL-2, is for Gehl skid loaders.
The non-universal plates fit Gehl skid loader models HL 40000, 4300, 4400, 4500 and 4600.
The mounts are fully welded.
berlon mpgl 4 20  berlon mpgl 5 20  berlon mpgl 6 20  berlon mpjd 1 20
MPGL-4 MPGL-5 MPGL-6 MPJD-1
Mounting Plate Model MPGL-4
These mounting parts, MPGL-4, are for Gehl skid loaders.
The non-universal mounts fit Gehl skid loader models HL 4000, 4300, 4400, 4500,
and 4600.
The parts are fully welded.
Mounting Plate Model MPGL-5
These mounting parts, MPGL-5, are for Gehl skid loaders.
The non-universal mounts fit Gehl skid loader models 4525, 4625,
5620, 5625, 6620 and 6625.
The parts are fully welded.
The plate measures 30 3/8" horizontally between the outside hooks.
Mounting Plate Model MPGL-6
These mounting parts, MPGL-6, are for Gehl skid loaders.
The non-universal mounts fit Gehl skid loader models 4635, 4835,
5635, and 6635.
The parts are fully welded.
The plate measures 30 3/8" from hook to hook.
Mounting Plate Model MPJD-1
These mounting parts, MPJD-1, is for John Deere compact tractors.
The non-universal mounting plate fits John Deere compact tractor models 200X and CX 210, 300, 300x and CX 400, and 400X anc CX.
It must be finish-welded after being mounted. 
Measurements include 46 7/8" center to center of the pins, and 15 1/16" from the pin up to the bar rest. 
berlon snowmw 20
SNOWWM
Use your truck-mounted Western or Meyer snowplow on your skid steer with Berlon snow mount.
The Berlon snow mount comes with a universal mount on the skid loader side.
This skid steer attachment mount weighs 161 lbs.
Converts Western/Meyer truck plows to skid steer
Overall width 47.5"
Height 18.7"