Land Pride AFM3011
Double tap to zoom
|Counter blade rotation on center and
|Spreads grass clippings more evenly.
Wing decks throw grass away from the rear deck.
Rear deck doesn't get covered up or bogged down by cut grass.
Prevents robbing tractor horsepower.
|5'-7" (1.7 m) Transport width||Meets most city/county codes for transport width.|
|6" (15 cm) Deck overlap||Eliminates skipping when going into a tight turn.|
|10'-11" (3.5 m) Cutting width
three 48" decks
|Sized right for golf courses, cities, schools.
Small decks give excellent flexibility.
|Sleek frame design, including single
beam hitch and compact deck overlap
|Design allows operator to make tighter turns without leaving windrows and skips.
AFM virtually becomes a zero turn mower. (Over-sized tires may not allow this.)
|Automatic transport wing locks||When wings are raised in the full transport position, the wings lock in place.
No need to get off the tractor to lock. Pull rope from tractor seat to un-lock.
|Optional Hydraulic Transport Locks||Transport locks can be released easily from the tractor seat while operating the;
same tractor control lever that folds and unfolds the mower decks.
Eliminates pulling a rope to release transport locks.
|18" Transport tires with tapered roller
|Transport tires offer smooth roading and less grass compaction.
Allows grass to stand up. Tapered roller bearings offer longevity.
|Removable transportation tire spindles||Allows a spindle to be replaced by simply removing one bolt.|
|Back wheels on side decks in line with transportation tires||Allows tighter turns without skips.|
|Zero turn radius||Sleek frame design allows operator to make tighter turns without leaving windrows or skips.
The AFM virtually becomes a Zero Turn Mower.
|Rigid rear side deck tires.||Rigid wheel yokes holds hills and slopes better.|
|10" Solid rubber deck tires||Solid rubber won't go flat.|
|Square tube gauge wheel arms||Gives the mower gauge wheel arms a great deal of "hidden" strength.|
|Low pivot points on deck||The lower the pivot points are to the ground, the more side to side swing,
allowing for excellent flotation from each deck.
|Deflectors built into mower decks||Safety features meet ANSI standards.
Many competitors use chains for protection.
Once chains are removed the unit does not meet ANSI specifications.
|Rear discharge||Even dispersal, discharged items are aimed downward.
No rear chains are needed, which tend to clump damp grass.
|Rounded front deck edges with no protruding skid shoe||Helps protect trees and other obstacles.|
|1/4" (6 mm) Front edge & all-welded seams||Provides extra durability.|
|Cat. 3 equal angle main driveline||Equal angle main driveline allows for tighter turns without harming U-joints in driveline.|
|Shear bolt protection||Guards against premature gearbox failure.
Protects mower deck spindles.
|Cat. 3 wing drivelines||Designed to withstand start-up torques.|
|ABS guards||No paint to scratch off, lighter weight, no rattling or rust.|
|Heavy gearbox mounts on center and side mower decks||Handles start-up torque better.|
|Gearbox Horsepower Rating||30-55 hp (22-41 kw)|
|Gearbox warranty||Three year limited gearbox warranty.
Demonstrates our confidence in the gearbox's quality and lasting performance.
|Sealed for life blade spindle bearings||No blade spindles to grease means no guards to remove to grease blade spindles.|
|Middle spindle sits towards
the back of the mower deck.
|Uses less horsepower and allows material to escape the mower deck easier.
The discharge of material is more even. Design eliminates windrowing.
|Spring loaded idlers||Applies constant tension to belt to run efficiently.|
|High blade tip speed||Lifts grass up for a clean cut and efficient discharge of material.
Tip speed rates are as high or higher than the competition.
|Choice of Blade
Medium lift standard
Others available thru parts dept.
|Low Lift - Highly recommended in sandy soils where lifting isn’t crucial.
Disturbs the soil very little, allowing blades to wear longer.
Medium Lift - Medium suction for lifting grass.
Requires less horsepower than high lift.
High Lift - Greatest suction for lifting grass before cutting.
Can take higher horsepower in tall dense grass.
Not recommended in sandy soils.
Mulching - Perfect for leaf mulching.
|Cutting width in (m)||132 (3.35)|
|Overall width in (m)||135 (3.42)|
|Transport height in (m)||76 (1.93)|
|Transport width in (m)||67 (1.7)|
|Overall length in (m)||136 (3.45) in transport position|
|Weight lbs (kg)||1,952 (885)|
|Hitch Weight lbs (kg)||374 (170)|
|Tractor horsepower hp (kW)||Minimum 30-55 (22-41)|
|Hitch||Pull type with safety tow chain|
|Tongue support lb (kg)||2,000 (907) Capacity Screw Jack|
|Gearbox support in (mm)||1/4 (6) Steel plate|
|Gearboxes||540 rpm (1)-splitter gearbox and (3)-wing gearboxes|
|Gearbox lubrication||Gear lube 80-90W EP|
|Gearbox oil capacity pints (L)||Three - wings: 1.7 (.8)
Splitter: 1.32 (.62)
|Main driveline (1)||Category lll equal angle|
|Deck drivelines (3)||Category III with shearbolt protection|
|Cutting height in (mm)||1 to 5 1/2 in 1/2 (25 to 140 in 13 increments)|
|Deck size and quantity in (m)||Three each at 48 (1.22)|
|Deck overlap in (cm)||6 (15)|
|Deck thickness ga (mm)||10 (3.4)|
|Blade drive belt||1 per deck - B-section V belt|
|Drive belt tensioning||Spring loaded idler|
|Blade bearings||Sealed ball bearings|
|Blade size and type 3 each per deck in (mm)||Standard medium lift blades - 1/4 x 2 1/2 x 16 7/8 (6 x 64 x 430)
Optional blades - Low lift, high lift, & mulching
|Blade overlap in (mm)||3/16 (5)|
|Blade tip speed fpm (mpm)||16,000 (4900)|
|Deck tires||Ten each, 10" x 3.25", solid rubber with caged roller bearing|
|Deck wheel spindles in (cm)||1" (25.4) with nylon bushings|
|Transport tires||Two each, 18" x 9.5", sealant with tapered roller bearings|
|Transport locks||Automatic transport locks with pull rope release|
|Wing flex||23° left to right 22° front to back|
|Rear deck flex||13° front to back|
|Hydraulic outlets||One set required|
|Deck lift cylinders||Dual acting|
|Gauge wheel arms||Square tubing with 1/4" (6 mm) wall|
|Turning radius||Zero turning radius|
|Mowing capacity||@ 2 mph = 2.68 acres per hour (3.2 km/h = 1.1 hectares per hour)
@ 4 mph = 5.37 acres per hour (6.4 km/h = 2.2 hectares per hour)
@ 6 mph = 8.10 acres per hour (9.7 km/h = 3.3 hectares per hour)
|Signal lights 7 pin connector||Incandescent bulb
SAE J560 pin configuration