Land Pride DZ3084
Double tap to zoom
|Universal Quick Attach-Hitch, Meets ISO 24410||Design for quick and easy attachment to most skid steers and track loaders|
|Choice of 84" or 96" working widths||Allows customers to choose the blade that meets their operational needs.|
|Blade pivots hydraulically 6-ways||Hydraulic adjustment provides for quick and easy blade positioning. Blade adjust 6-ways to meet the operator’s needs.|
|Reinforced 3/8" moldboard with fully boxed bracing||Provides added strength and durability.|
|3 1/2" Double acting welded hydraulic cylinders||Easily enables angling up to 30 degrees left or right, and tilts 10 degrees up or down. The material can easily be distributed where you want it to go.|
|Standard operator mounting step||Provides for safer and easier mounting into and dismounting from the skid steer cab.|
|26 1/2" Overall moldboard height||Provides ability to perform in deeper material conditions|
|Replaceable bottom wear edge||Protects underside of moldboard against wear.|
|Reversible and replaceable 3-piece cutting edge||3-Pieces so that the end user can replace the entire cutting edge or just the high-wear corner sections to reduce maintenance cost.|
|Heavy 3" diameter pivot pins with greasable hardened spring bushings||Large diameter pivot pins stand up to rugged use. Lubrication helps protect against wear and rust seizing. Hardened bushings can be replaced if needed.|
|Weight||1345 lbs (610.1 kg)|
|Hitch type||Skid steer type Universal Quick-Attach, meets ISO 24410|
|6-Way blade adjustment||Top of hitch plate tilts forward or backward.
Blade angles left or right.
Blade tilts clockwise or counterclockwise.
|Maximum blade angle||30 degrees left and 30 degrees right|
|Maximum blade tilt||10 degrees clockwise and 10 degrees counterclockwise|
|Cylinder size||3 1/2" bore x 8" stroke|
|Maximum hydraulic pressure||3500 psi (24.13 MPa)|
|Maximum blade cutting width:
At straight across
At 30-degree angle
84" (2.13 m)
72 3/4" (1.85 m)
|Moldboard thickness||3/8" (10 mm)|
|Moldboard height||26 1/2" (67.3 cm)|
|Pivot bushings||Replaceable and greasable, hardened spring bushings|
|Pivot pin sizes||Angle pin = 3" x 11 5/8" lg.
Pivot pin = 3" x 2 13/16" lg.
End cutting edges
Center cutting edge
3/4" x 8" x 8 1/2" (1.9 cm x 20.3 cm x 21.6 cm)
3/4" x 8" x 66" (1.9 cm x 20.3 cm x 1.68 m)
|Wear edge||1/2" x 4" x 84" (1.3 cm x 10.2 cm x 2.13 m)|