Land Pride FM2560 Kunau Implement, Iowa

Features
Specs

Features

Features	Benefits
48", 60", 72", & 84" Cutting widths	Wide selection of cutting widths to meet specific applications.
30-80 hp tractor	Fits a large array of tractors to meet the needs of consumers, municipalities, and landscapers.
Spring-loaded, self-indicating, belt-tensioning system (FM2560-FM2584)	Available on 60", 72", and 84" models. Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes maintaining proper belt tension easy, and increases belt life.
0"-6" Cutting height	Variable cutting height allows operators to scalp the ground, or leave a 1" to 6" cut.
1", 1 1/2", & 2" Blade cutting capacity	Ducksfoot blade can cut up to 1" small brush. Heavy-duty Y blade can cut up to 1 1/2" brush. Hammer blade can cut up to 2" small saplings.
Sealed heavy-duty tapered roller rotor bearings	Sealed for protection from dust and debris. Withstand shock loads and deflection from heavy use.
Reverse rotor rotation	Brings the cut material up and over which allows it to be dispersed more evenly. Allows material to be shredded completely
High knife tip speed	Knife tip speed 12,046 fpm provides a clean cut, creates a vacuum effect when using hammer or ducksfoot blades, and slices through saplings with great force when using heavy-duty Y blades.
Full width rear access door	Allows for easy access to blades and rotor for replacing blades and cleaning out debris.
Quick-change D-ring blade system	Replace ducksfoot blades without any tools.
3- “5V” Section Powerband Belt	Powerband belt distributes load evenly, which prevents the belts from jumping off the drive when a shock load occurs.
Hitch offset: 8" for FM2548-60 10" for FM2572-84	The two position hitch allows the mower to be offset to the right for a closer cut alongside buildings, fences, and roadsides.
Three blade options: ducksfoot, hammer, heavy-duty Y	Three blade options to meet specific applications.
Accessible rotor	Rotor can be removed by unbolting cover plates and bearings.
Grease zerks on end caps of driveline cross journals	Intermediate and main driveline cross journals are easier to grease.
Standard removable roller scraper mounted with only two bolts	Keeps roller clean for consistent cutting height in wet conditions. Two bolt mounting makes it easy to remove to allow heavy dry cuttings flow freely over the roller.
Front safety chains	Protects operator and bystanders from debris.
Replaceable skid shoes	Prevents wear on end panels from ground contact.

Model Numbers	FM2560
Weight of Standard unit with optional ducksfoot rotor	965 lbs.
Weight of optional rotors:	Blade qty / weight 24 ea. / 191 lbs. - Rotor with ducksfoot blades 32 ea. / 215 lbs. - Rotor with heavy duty Y blades 16 ea. / 222 lbs. - Rotor with hammer blades
Optional brush rake assembly	45 lbs.
Working width	60"
Overall width	72"
Drive cover height	33"
Rotor rpm	2450
Hitch	Cat. I
Gearbox rating	80 hp
Driveline	Cat. 4
Offset hitch	Center or 8" Right
Blade tip speed	12,046 fpm
Blade attachment	D-ring for ducksfoot blades, C-clamp for heavy-duty Y and hammer blades
Rotor bearings	Spherical roller bearing
Brush rakes (standard)	8
Rotor diameter	5" With reinforcing bars
Rotor rotation	Reverse
Cutting height	0"-6"
Cutting capacity	Ducksfoot: 1" Heavy-duty Y blades: 1.5" Hammer blades: 2"
Rear roller diameter	5.56"
Hood/deck thickness	10 Ga

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated

Land Pride FM2560

Features

Preston, IA

DeWitt, IA

Land Pride FM2560

FM2560

Get A Quote

Send To A Friend

Loan Calculator

Schedule A Demo

Features

Preston, IA

DeWitt, IA