Land Pride RCF3672 Kunau Implement, Iowa

Features
Specs

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
190 HP gearbox	A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 5 driveline with 4-plate slip-clutch	Slip-clutch driveline offers convenience for continual work.
Dual position clevis type 3-point floating top link	Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
Lower clevis type 3-point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy deck construction with 3/16" deck top & 1/4" side skirts	Strong heavy deck material for rugged use.
Box tubing deck supports	Makes for a stronger rigid deck.
Fully welded deck	Adds additional strength.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
13 3/8" Deck Height	Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height	Provides for a wide range of cutting conditions.
High cutting capacity	Can cut brushy areas with saplings up to 4".
Skid shoes	Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Plate stump jumper	Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed, 14,861 fpm	Ensures clean cut.
15"Laminated tailwheel	Laminated material is long lasting in rough conditions and can't go flat.
1 1/2" Heavy-duty spindle on tailwheel	Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Optional Guarding	Protect against flying debris. Customer can choose to include single chain, double chain or rubber guarding on the front and single chain or double chain guarding on the back.

Model	RCF3672
Machine weight	1337 lbs. with front and rear single chain guards
Hitch	Category I or II with Floating Clevis Top Link, Quick Hitch Adaptable
Cutting width	72"
Overall width	78 1/2"
Overall Length	124 3/4"
Deck height (bottom of deck to bottom of skid shoe)	13 3/8"
Cutting height	2" to 12"
Cutting capacity	4" Diameter
Recommended tractor power take-off horsepower	60-190 horsepower
Power take-off speed	540 rpm
Gearbox ratio	1:1.48 Speed-Up Beveled Gears, Cast Iron Housing, 1 3/4"-20 spline input shaft and 2 3/8" output shaft
Gearbox Lubricant	EP 80-90W oil
Gearbox oil Capacity	10 pints
Deck construction	All welded deck
Deck material thickness	3/16"
Side skirt material thickness	1/4"
Skid Construction	Replaceable bolt on skid shoes
Stump jumper	Round Pan 3/16" x 30 7/16" with Blade Holder Bar
Blades (2)	1/2" x 4" Heat Treated Alloy Steel Free-Swinging High Lift - Low Friction
Blade bolts	Keyed with harden flat washers & lock nuts
Blade tip speed	14,861 FPM
Drive-line	ASAE Category 5 with 4-plate Slip Clutch
Drive-line protection	Center Bolt 4 plate Slip Clutch
Tailwheel mount	Welded A-arm and Caster Fork with 360 degree swivel
Tailwheel	4" x 8" x 15" Laminated Tire with cast iron hub
Front guard	Optional: Rubber Belting or Single Chain Guard or Double Chain Guard
Rear guard	Optional: Single Chain Guard or Double Chain Guard

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated

Land Pride RCF3672

Features

Preston, IA

DeWitt, IA

Land Pride RCF3672

RCF3672

Get A Quote

Send To A Friend

Loan Calculator

Schedule A Demo

Features

Preston, IA

DeWitt, IA