Land Pride RCF3684 Kunau Implement, Iowa

Features
Specs

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
Cat. 5 driveline with 4-plate slip-clutch	Slip-clutch driveline offers convenience for continual work.
Cat. II and III 3-Point Hitch Options with Quick Hitch Capability	Fits a wide variety of tractors. Quick Hitch provides for fast hook-up.
Dual position clevis type 3-Point floating top link	Permits deck to follow the terrain for an even cut.
Lower clevis type 3-Point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Pull-type hitch option	Fits older tractors without a top link and smaller tractors without enough lift capacity.
84" Cutting width	Wide cutting width, reduces cutting time in the field.
Heavy deck construction with 3/16" deck top & 1/4" side skirts	Strong heavy deck material for rugged use. Heavy side panels protects sides from debris being thrown against them from the blades.
Fully welded deck	Adds additional strength and deck integrity.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
13 3/8" Deck height	Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height	Provides for a wide range of cutting conditions.
High cutting capacity	Can cut brushy areas with saplings up to 4".
Skid shoes	Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Plate stump jumper	Standard round stump jumper slides over stumps, rocks, and debris.
High blade tip speed	Ensures clean cut.
4" Dia. cutting capacity	Can aid in clearing brush.
Dual laminated tailwheels	Dual tailwheels offer greater stability in uneven terrain. Laminated material is long lasting in rough conditions. Can't go flat.
1 1/2" Heavy-duty spindle on tailwheel (3-Point cutter)	Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Wheel bearings (Pull-type cutter)	Tapered roller bearing in cast iron hub.
Optional guarding	Protect against flying debris.

Model Numbers	RCF3684 3-Point Type	RCF3684 Pull-Type
Machine weight	2,000 lbs. (907.2 kg) With front & rear single chain guards	2,104 lbs. (954.4 kg) With hydraulic adjustment and front & rear single chain guards
Hitch	Category II or III with floating clevis top link, Quick Hitch adaptable	Pull-type with clevis
Pull type tongue weight	N/A	894 lbs. (405.5 kg)
Cutting width	84" (2.13 m)
Overall width	90 1/2" (2.30 m)
Overall length	130" (3.30 m)	179 1/2" (4.56 m)
Deck height (Bottom of deck to bottom of skid shoe)	13 3/8" (34.0 cm)
Cutting height	2" - 12" (5.1 cm to 30.5 cm)
Cutting capacity	4" (10.2 cm) Diameter
Recommended tractor horsepower	70-190 hp (52.2-141.7 kw)	50-190 hp (37.3-141.7 kw)
Power take-off Speed	540 rpm
Gearbox	1:1.21 Speed-up beveled gears, Cast iron housing, 1 3/4" (4.4 cm) - 20 spline input shaft and 2 3/8" (6.0 cm) output shaft
Gearbox lubricant	80-90W oil
Gearbox oil capacity	10 pints (4.73 L)
Deck construction	All welded deck
Deck material thickness	3/16" (5 mm)
Side skirt material thickness	1/4" (6 mm)
Skid construction	Replaceable bolt on skid shoes
Stump jumper / blade holder	3/16" (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar
Blades (2)	1/2" x 4" (1.3 cm x 10.2 cm) Heat treated alloy steel free-swinging high lift - low friction
Blade bolts	Keyed with harden flat washers & locknuts
Blade tip speed	14,369 fpm (73.0 mps)
Driveline	ASAE category 5 with 4-plate slip clutch
Driveline protection	4 plate slip clutch
Transport axle	Cushioned shock absorption
Rear deck height adjustment options	Ratchet jack or hydraulic cylinder
Tailwheel	4" x 8" x 15" Laminated tire with cast iron hub (3-Point type); 4" x 8" x 21" Laminated tire with cast iron hub (Pull type)
Front guard	Optional: Rubber belting, single chain guard or double chain guard
Rear Guard	Optional: Single chain guard or double chain guard
Jack Stand	Jack stand on tongue of pull-type cutter

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated

Land Pride RCF3684

Features

Preston, IA

DeWitt, IA

Land Pride RCF3684

RCF3684

Get A Quote

Send To A Friend

Loan Calculator

Schedule A Demo

Features

Preston, IA

DeWitt, IA