Kubota SCL1000 Kunau Implement, Iowa

24.8 HP Turbo-charged Kubota engine provides quiet operation, high altitude performance and requires no DPF.
Hydraulic pump directly connected to the engine reduces maintenance.
Vertical lift loader arms reach higher and further than the competition with a hinge pin height of 84.7" and a reach of 26" (at 45° dump angle).
1000 lbs. ROC combined with 15 gpm auxiliary hydraulic ï¬‚ow make for a powerful and productive compact utility loader.
Works in zero clearance yards with low impact wide track design (4.0 psi) minimizing damage to grass or landscaping.
4.9 mph Best in class travel speed

Cushioned loader boom cylinders and adjustable platform suspension increase operator comfort for maximum productivity.
4.3" Color LCD monitor
Keyless start with passcode protection
12 Volt charging port

The patent pending T-drive handle provides intuitive and ergonomic steering.
Hydraulic pilot-operated loader and drive control valves offer precise and responsive control of the machine.
Right hand joystick controls loader arm and bucket movement.
Auxiliary hydraulics are easily operated without removing your hand from the loader joystick.
Continuous flow in either direction is as simple as pushing a button.

Auxiliary hydraulic lines are routed inside the loader arm for optimal protection. Case drain is standard. Auxiliary hydraulic couplers are pressure release type.
Attachment hose guide is standard.
Welded track frame has angled top for debris shedding and the dual flange front idler provides better stability and weight distribution.

Easy to access centralized filters and everyday maintenance items.
Dash indicator light alerts when the air filter needs cleaned, and service information is readily available at the touch of a button.
Maintenance time is reduced with permanently sealed and lubricated track rollers, and the grease type track tension system.

Heavy-duty cast CII Coupler and protective cover for bucket cylinder fittings.
CII coupler is standard.
Optional welded 2-lever style coupler.
Solid state controller minimizes fuses reducing electrical components, while improving reliability.
The hood is made out of impact resistant material for greater protection.

Engine RPM has to be at idle to unlock the hydraulics for machine operation.
Walk behind mode for loading onto a trailer allows operation of the travel and loader joysticks only.
When operator leaves the platform, the parking brake is automatically engaged.
Front LED work light has 30 second courtesy timer to stay on after powering off.

Specifications

Horsepower (gross)	Horsepower (gross)24.8
Displacement, cu in (cm3)	Displacement, cu in (cm3)54.8 (898)
Engine Type	Engine TypeWater cooled 4 cycle diesel engine with 3 cylinder, turbo, EPA Tier 4
Rated Speed, rpm	Rated Speed, rpm2800
Low Idling Speed, rpm	Low Idling Speed, rpm1250
Overall Length, in (m)	Overall Length, in (m) Transport (w/Std Bucket Parallel to Ground): 107.7 (2.74) (w/o Bucket): 84.9 (2.16):
Overall Height, in (m)	Overall Height, in (m)55.7 (1.41)
Overall Width w/Std Bucket, in (cm)	Overall Width w/Std Bucket, in (cm)36 (91.44)
Rated Operating Capacity (ROC), lb (kg)	Rated Operating Capacity (ROC), lb (kg)1,000 (453 kg) @ 35%
Tipping Load, lbs (kg)	Tipping Load, lbs (kg)2857 (1296)
Auxiliary Hydraulic Pressure, psi (mPa) (kgf cm2)	Auxiliary Hydraulic Pressure, psi (mPa) (kgf cm2)2800 psi (19.3) (196.8)

SCL1000